Earn Higher Grades With Instant Assignment Help.Ask Question!

Computer Network
(5/5)

Create the four VLANs on switch A, Set the domain name to TELE33324v1. This will be your VTP server. set the required ports on switch A to either ACCESS or TRUNK

INSTRUCTIONS TO CANDIDATES
ANSWER ALL QUESTIONS
  • Create the four VLANs on switch A, with the names given in Figure 1.   Set the domain name to TELE33324v1. This will be your VTP server. 
  • Set the required ports on switch A to either ACCESS or TRUNK, as appropriate. Put a screenshot to show your setting. [2]
  • Set switches B, C and D to be VTP clients, AFTER setting the domain name to TELE33324v1.
  • Set the required ports on switches B, C, and D to either ACCESS or TRUNK. [4]
  • Assign addresses from network 192.168.4.0 to the VLAN 1 interface on each switch, and specify the default gateway as follows:

 

                int vlan 1

                ip address 192.168.4.x 255.255.255.0

                exit

                ip default-gateway 192.168.4.1

  • Enable inter-VLAN communication between VLANs 2 and 5 by creating appropriate subinterfaces on Router A on the connection to Switch A. Also, assign IP address 192.168.4.1 to the main interface leaving router A going to Switch A . Put a screenshot to show your commands for this setting.    [3]

   

  • On any computer on VLAN 2, successfully ping the other PCs on VLAN 2 and the PCs on VLAN 5.                                     [3]
  • On any computer on VLAN 5, successfully ping the other PCs on VLAN 5 and the PCs on VLAN 2.    
Attachments:
(5/5)

Related Questions

CSI 1420 Introduction to C Programming & Unix Fall 2018, CRN 44882, Oakland University Homework Assignment 6 - Using Arrays and Functions in C

DescriptionIn this final assignment, the students will demonstrate their ability to apply two majorconstructs of the C programming language – Fu

The standard path finding involves finding the (shortest) path from an origin to a destination, typically on a map. This is an

Path finding involves finding a path from A to B. Typically we want the path to have certain properties,such as being the shortest or to avoid going t

Develop a program to emulate a purchase transaction at a retail store. This program will have two classes, a LineItem class and a Transaction class. The LineItem class will represent an individual

Develop a program to emulate a purchase transaction at a retail store. Thisprogram will have two classes, a LineItem class and a Transaction class. Th

SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 1 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of

Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of

Ask This Assignment To Be Done By Our ExpertsGet A+ Grade Solution Guaranteed

expert
joyComputer science
(4/5)
12 Answers Hire Me
expert
Robert DLaw
(4.8/5)
883 Answers Hire Me
expert
Dr Samuel BarberaStatistics
(5/5)
604 Answers Hire Me
expert
Tutor For YouEconomics
(5/5)
637 Answers Hire Me