logo Use CA10RAM to get 10%* Discount.
Order Nowlogo
(5/5)

Customers bring their computers in for repair. The problem could be with their hard drive, their RAM, their CPU, and sometimes there is no problem (PEBKAC = Problem exists between keyboard and chair).

INSTRUCTIONS TO CANDIDATES
ANSWER ALL QUESTIONS

I need help with my C++ programming homework

Summary:

Customers bring their computers in for repair. The problem could be with their hard drive, their

RAM, their CPU, and sometimes there is no problem (PEBKAC = Problem exists between

keyboard and chair).

 

Program:

Create a Computer each time the user says a new customer is approaching. Details of

computer can either be random or set up explicitly in main through constructors. Do not make a

dippy menu to create the computer. Each part of the computer has a chance to be broken

(below). Try to turn the computer on, test each individual part if it doesn't turn on, offer to sell a

replacement part for anything broken or missing, try to turn the computer on again.

The details of the test data doesn't matter, but it takes like 5 seconds to look up what valid

values would be.

 

Use cases:

Here are the last few interactions at the repair counter to show what is happening.

Customer comes in with an Intel i7 @ 2.4 Ghz. It has a 1 TB SATA drive and 12 GB of RAM.

After testing each part we found the CPU was broken. The customer picked an i9 3.2 Ghz to

replace it

Customer comes in with Intel i9 @ 3.2Ghz. It has a 256 GB SSD and 16 GB of RAM. After

testing we found nothing wrong. It turned on so they didn't buy anything

Customer comes in with a Pentium @.5GHz. It has a 2 TB SATA drive but no RAM After

testing each part we found the processor and drive parts were broken. The customer picked a

new item from all three categories (two broken and one missing).

After we sell the new parts, we always make sure the computer can turn on.

 

Data

Computers are made of a Processor, a Drive, and RAM. A computer has to have all three parts,

and have them not broken, to be able to start up. For any customer who comes in, there is a

5% chance their CPU is broken, a 15% chance their drive is broken, and a 10% chance their

RAM is broken.

Class methods:

bool Computer::TurnsOn() const;

bool Computer::RAMTest() const;

bool Computer::CPUTest() const;

bool RAM::IsFunctional() const;

bool CPU::IsFunctional() const;

SP21: Yes the parts have to be dynamic. That's what replacing a part with a new one means.

Yes the computer has to be dynamic. Each customer has a different computer, you aren't

constantly refixing the same on. And parts don't become broken by looking at them. A part is

broken or it is not. It doesn't change each time you look.

 

(5/5)
Attachments:

Expert's Answer

660 Times Downloaded

Related Questions

. Introgramming & Unix Fall 2018, CRN 44882, Oakland University Homework Assignment 6 - Using Arrays and Functions in C

DescriptionIn this final assignment, the students will demonstrate their ability to apply two ma

. The standard path finding involves finding the (shortest) path from an origin to a destination, typically on a map. This is an

Path finding involves finding a path from A to B. Typically we want the path to have certain properties,such as being the shortest or to avoid going t

. Develop a program to emulate a purchase transaction at a retail store. This program will have two classes, a LineItem class and a Transaction class. The LineItem class will represent an individual

Develop a program to emulate a purchase transaction at a retail store. Thisprogram will have two classes, a LineItem class and a Transaction class. Th

. SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 1 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of

. Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of

660 Times Downloaded

Ask This Question To Be Solved By Our ExpertsGet A+ Grade Solution Guaranteed

expert
Um e HaniScience

507 Answers

Hire Me
expert
Muhammad Ali HaiderFinance

768 Answers

Hire Me
expert
Husnain SaeedComputer science

669 Answers

Hire Me
expert
Atharva PatilComputer science

597 Answers

Hire Me

Get Free Quote!

424 Experts Online