Lab Assignment-1
[Weightage - 10%]
1. Assignment should be solved individually.
2. No marks will be awarded if plagiarism is detected.
3. Questions can be performed in simulation mode.
4. Please take some suitable screen shots of the KEIL IDE-in debug mode to demonstrate the desired output. Ensure that the screenshot captures system time & day.
Q.1. Assembly Language Programs (ALP) for an ARMv4T processor to implement following IF-ELSE statement are given below:
if ( a<b)
{
}
else
Code-1:
x=5 y=c+d
y=c-d
AREA RESET, CODE, READONLY ENTRY
START
ADR R4,SRC LDR R5,=DST BL SUB1
STOP B STOP
SUB1 LDR R0,[R4],#4
LDR R1,[R4],#4 CMP R0,R1 BGE FB1 LDR R0,[R4],#4
LDR R1,[R4],#4 ADD R0,R0,R1 MOV R2,#5 STR R2,[R5],#4 STR R0,[R5]
B AFT
FB1 LDR R0,[R4],#4
LDR R1,[R4] SUB R0,R0,R1 STR R0,[R5,#4]
AFT MOV PC,LR
SRC DCD 0x20, 0x40, 0x30, 0x10
AREA RESULT, DATA, READWRITE DST DCD 0, 0
END
Code-2:
AREA RESET, CODE, READONLY ENTRY
START
ADR R4,SRC LDR R5,=DST BL SUB1
STOP B STOP
SUB1 LDR R0,[R4],#4
LDR R1,[R4],#4 CMP R0,R1 LDR R0,[R4],#4 LDR R1,[R4] MOVLT R2,#5 STRLT R2,[R5]
ADDLT R0, R0, R1 SUBGE R0, R0, R1 STR R0,[R5,#4]
AFT MOV PC,LR
SRC DCD 0x20, 0x40, 0x30, 0x10
AREA RESULT, DATA, READWRITE DST DCD 0, 0
END
Simulate the above given Code-1 and Code-2 using Keil uVision5 software and answer the following questions.
a) On reset what is the ARM7TDMI processor's mode of operation? [1 Mark]
b) How many states are taken for the execution of an Arithmetic instruction, Load and Store instruction respectively? [1 Mark]
c) Are the number of states taken for completion same for BGE instruction if the branch
– (1) is taken (2) not taken? [1 Mark]
d) Measure the performance of code-1 and code-2 for the following conditions [1 Mark]
Condition Code-1- States Code-2- States
a<b
a>b
a=b
DescriptionIn this final assignment, the students will demonstrate their ability to apply two ma
Path finding involves finding a path from A to B. Typically we want the path to have certain properties,such as being the shortest or to avoid going t
Develop a program to emulate a purchase transaction at a retail store. Thisprogram will have two classes, a LineItem class and a Transaction class. Th
1 Project 1 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of
1 Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of