reate a Network Server Topology in CISCO PACKET TRACER for a car dealership, consisting of Routers, PC\'S, Servers, and any End-Devices

INSTRUCTIONS TO CANDIDATES

ANSWER ALL QUESTIONS

I need you to create a Network Server Topology in CISCO PACKET TRACER for a car dealership, consisting of Routers, PC'S, Servers, and any End-Devices for at least 30 users combined in all the departments. You can break down the departments and servers by Sales, Service and Marketing.

The assignment also requires for an addressing table to be filled out with the IP Address, Subnet Mask, and Default Gateway.

The IP address can be chosen by you and used accordingly for the rest of the devices and connections. I will attach along with this a sample document that gives an exact visual outline of the assignment. I really need this to be completed today,

 

 

Project Scope

A small business network has to be designed for the XYZ organization.  The organization has occasional guest users (Max 10) visiting the office.  There are a total of 50 users in the organization.  An FTP server is also available for sharing files.

 

 Employees are segmented into the following work groups:

 

Administration: 5 full-time staff

Sales: 20 full-time staff

Marketing: 25 full-time staff

 

Network Requirements

A _192.168.0.0/24_ address is available for the network.  It must be divided into four subnets for:

 

Administration: 5 full-time staff

Sales: 20 full-time staff

Marketing: 25 full-time staff

Guests and Wifi up to 10 users

 

There is a printer and FAX dedicated to each department.

 

Both full-time employees and guests use the local access point for their BYOD devices such as smart phones and laptops.

 

There is a printer and FAX dedicated to each department.

 

Dedicated workstations must be cabled for the full-time staff as well as the printers, faxes, and the FTP server.

 

WiFI should be accommodated throughout the business which resides on two floors of a building.

 

 

Logical Network Diagram

 

 

Addressing Table

Device Interface IP Address Subnet Mask Default Gateway

R1 G0/0/0 192.168.0.89 255.255.255.248 NA

G0/1/0 192.168.0.81 255.255.255.248 NA

G0/1/1 192.168.0.33 255.255.255.224 NA

G0/1/2 192.168.0.1 255.255.255.224 NA

G0/1/3 192.168.0.65 255.255.255.240 NA

S0/2/0 64.100.0.4 255.255.255.252 NA

Administration VLAN 1 192.168.0.82 255.255.255.248 192.168.0.81

Sales VLAN 1 192.168.0.34 255.255.255.224 192.168.0.33

Marketing VLAN 1 192.168.0.2 255.255.255.224 192.168.0.1

Guest VLAN 1 192.168.0.66 255.255.255.240 192.168.0.65

FTP VLAN 1 192.168.0.90 255.255.255.248 192.168.0.89

PC-Admin1 NIC 192.168.0.86 255.255.255.248 192.168.0.81

PC-Sales1 NIC 192.168.0.62 255.255.255.224 192.168.0.33

PC-Marketing1 NIC 192.168.0.30 255.255.255.224 192.168.0.1

PC-Guest1 NIC 192.168.0.78 255.255.255.240 192.168.0.65

 

Equipment 

• Router:  Cisco ISR4321/K9  (IRU) processor, with NIM-ES2-4 module providing four switching ports.  cisco ISR4321/K9 (1RU) processor with 1687137K/6147K bytes of memory.

• 5 Switches: cisco ISR4321/K9 (1RU) processor with 1687137K/6147K bytes of memory. Processor board ID FLM2041W2HD.  

• 51 workstations, Dell OptiPlexc 7060 with Intel 802.3 NIC

• 1 Dell Power Edge T640 Server

• 2 Konica Minolta BizHub 227 printers

• 2 Dell 823 laser printers

 

Attachments:

Related Questions

. Introgramming & Unix Fall 2018, CRN 44882, Oakland University Homework Assignment 6 - Using Arrays and Functions in C

DescriptionIn this final assignment, the students will demonstrate their ability to apply two ma

. The standard path finding involves finding the (shortest) path from an origin to a destination, typically on a map. This is an

Path finding involves finding a path from A to B. Typically we want the path to have certain properties,such as being the shortest or to avoid going t

. Develop a program to emulate a purchase transaction at a retail store. This program will have two classes, a LineItem class and a Transaction class. The LineItem class will represent an individual

Develop a program to emulate a purchase transaction at a retail store. Thisprogram will have two classes, a LineItem class and a Transaction class. Th

. SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 1 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of

. Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of