logo Use CA10RAM to get 10%* Discount.
Order Nowlogo
(5/5)

You are a senior network administrator for Acme Corp.

INSTRUCTIONS TO CANDIDATES
ANSWER ALL QUESTIONS

Objective

You are a senior network administrator for Acme Corp.  Your IT director announced that the company is expanding outside of the Joliet area.  He gave you the project to design the new network.  The network address will be 10.2.0.0/22.  He also gave you the specifics what is needed for each site.  Complete the following tasks:

Part 1 Media, Cabling, and Connectors

Acme Corp is adding more employees and floor space.  The network needs different types of connectivity.  Design the proper type of media (copper, fiber, RF), cabling, and connection needed for each site below:

1. Joliet is expanding from T-building to E-building that are 1500 ft apart.  The bandwidth will need to be 1 GB speed between the buildings. Connectors need to square shaped and have a push-in/pull-out mechanism.

 

Click here to enter text.

2. Romeoville has two office spaces that are within 215 ft from each other.

 Click here to enter text.

3. City Center needs network connections to the warehouse for a few employees (three triangles) and can install only one network cable to the warehouse for the connection. 

 Click here to enter text.

4. Morris’s site is in an industrial campus with high EMI. Each workstation cable needs to be protected from EMI and the budget does not allow expensive cabling.

Click here to enter text.

Part 2 Subnetting

Subnet 10.2.0.0/22 to maximize the IP addressing available.  Use the table to assist with the design of the new network addressing for the following:

a. Joliet will have 405 users.

b. Romeoville will have 200 users.

c. City Center will have 75 users

d. Morris will have 16 users.

e. There should be three remaining networks with a specific prefix for future use.

f. Three WAN networks need to connect Joliet to the other sites with 2 IP addresses in each WAN network.  Use Future network 3 (the last unused subnet) to begin subnetting into the WAN networks.

 

Network Location Number of IP Addresses Needed Network Address/Prefix Subnet mask First Useable Address Last

Useable

Address

Broadcast

Address

Joliet 405

Romeoville 200

City Center 75

Morris 16

Future network 1 n/a n/a n/a n/a n/a

Future network 2 n/a n/a n/a n/a n/a

Future network 3 n/a n/a n/a n/a n/a

Network for WANs n/a n/a n/a n/a n/a

Joliet-Rom WAN 2

Joliet-City Cen WAN 2

Joliet-Morris WAN 2

Part 3 Assign IP Addresses to Network Devices

Each site will have the following: 

a. Routers-Each site will have a router that will need IP address configured with the following:   

1. Joliet router will have three WAN interfaces and one LAN interface.  

i. Each Joliet router interface, use the first available IP address in the assigned networks 

2. Romeoville/City Center/Morris routers will have one WAN interface and one LAN interface each. 

i. Each WAN interface of the routers will have the other IP address in the network.  

ii. Each LAN interface of the routers will have the first available IP address in the assigned networks

b. Switches-Each site will have switches for LAN management. 

1. Joliet and Romeoville will need two switches each - use the second and third address available.  

2. City Center and Morris will have one switch each - use the second available IP address.

c. Servers- for each server include the IP address, subnet mask, and default gateway:  

1. Joliet will have three servers - Domain Controller, DHCP Server, and File and Storage server.  Use the last three available IP addresses in the network.

2. Romeoville will have two servers - Domain Controller and DHCP/File and Storage Server.  Use the last two available addresses.

3. City Center and Morris will have one server each - Read-only Domain Controller.  Use the last available IP address for the assigned networks.

d. Use the table below to document all of the addresses.  

 

(5/5)
Attachments:

Related Questions

. Introgramming & Unix Fall 2018, CRN 44882, Oakland University Homework Assignment 6 - Using Arrays and Functions in C

DescriptionIn this final assignment, the students will demonstrate their ability to apply two ma

. The standard path finding involves finding the (shortest) path from an origin to a destination, typically on a map. This is an

Path finding involves finding a path from A to B. Typically we want the path to have certain properties,such as being the shortest or to avoid going t

. Develop a program to emulate a purchase transaction at a retail store. This program will have two classes, a LineItem class and a Transaction class. The LineItem class will represent an individual

Develop a program to emulate a purchase transaction at a retail store. Thisprogram will have two classes, a LineItem class and a Transaction class. Th

. SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 1 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of

. Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of

Ask This Question To Be Solved By Our ExpertsGet A+ Grade Solution Guaranteed

expert
Um e HaniScience

662 Answers

Hire Me
expert
Muhammad Ali HaiderFinance

623 Answers

Hire Me
expert
Husnain SaeedComputer science

734 Answers

Hire Me
expert
Atharva PatilComputer science

514 Answers

Hire Me

Get Free Quote!

324 Experts Online