LAN 1 is a cellular configuration. The Gateway router can also be configured to support the NAT.

INSTRUCTIONS TO CANDIDATES

ANSWER ALL QUESTIONS

LAN 1 is a cellular configuration. The Gateway router can also be configured to support the NAT. The central office server supports DHCP for the internal LAN. All gateway routers connect via a serial link and use IPv6 public IP addresses which can be set as a static address. The IPv4 public addresses should be 172.0.10.1; 172.0.20.1; and, 172.0.30.1, for LAN1, LAN2, and LAN3, respectively.

LAN 2 is a wireless configuration. Each device is connected to an access point through a wireless network. This is a basic service set architecture, so there are no ad hoc wireless connections between devices. This networked system can use a single router connection between the access points and the Internet. However, between the access points and the router/gateway, install a switch and a network address translation (NAT) to convert IPv4 structured network to IPv6 encapsulated for transfer into the Internet via the router/gateway. The Smartphone devices must support both data and voice. You will need to use smartphone devices for the wireless connectivity because straight VoIP phones in Cisco do not support wireless; only PCs and smartphones. All of the internal network addressing is to be done by DHCP. The mobile devices do not support IPv6 addressing between the device and the access point.

LAN 3 is a wired system that has a wireless router. Connect the three VoIP phones in series with the three computers. The three laptops are connected via the wireless router. Segregate the wireless router and the wired system phones/PCs using a switch. The internal IPv4 addresses need to be assigned via DHCP, however, the public IPv4 and IPv6 protocols are static. You will need a vlan.

 

Attachments:

Related Questions

. Introgramming & Unix Fall 2018, CRN 44882, Oakland University Homework Assignment 6 - Using Arrays and Functions in C

DescriptionIn this final assignment, the students will demonstrate their ability to apply two ma

. The standard path finding involves finding the (shortest) path from an origin to a destination, typically on a map. This is an

Path finding involves finding a path from A to B. Typically we want the path to have certain properties,such as being the shortest or to avoid going t

. Develop a program to emulate a purchase transaction at a retail store. This program will have two classes, a LineItem class and a Transaction class. The LineItem class will represent an individual

Develop a program to emulate a purchase transaction at a retail store. Thisprogram will have two classes, a LineItem class and a Transaction class. Th

. SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 1 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of

. Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of Sea Ports. Here are the classes and their instance variables we wish to define:

1 Project 2 Introduction - the SeaPort Project series For this set of projects for the course, we wish to simulate some of the aspects of a number of